Back on track finally...
Now that I'm off those stupid crutches (see last post), I can finally get some work done!
Last night I worked on that driver's side patch panel some more. It's getting close to the welding stage, just a few more tweaks...
Here's a picture of those welding clamps I'm using now. I bought a bag of them at Harbor Freight for less than $10. They are more than worth it! Using these makes it quite a bit easier to get these panels on straight.
Here's one holding the patch on...
There's still a little bit of trimming to do, and that tab at the bottom has to have a 90 degree bend put into it. It folds back to meet the rocker panel. That's the last thing I'll do before welding.
Last night I worked on that driver's side patch panel some more. It's getting close to the welding stage, just a few more tweaks...
Here's a picture of those welding clamps I'm using now. I bought a bag of them at Harbor Freight for less than $10. They are more than worth it! Using these makes it quite a bit easier to get these panels on straight.
Here's one holding the patch on...
There's still a little bit of trimming to do, and that tab at the bottom has to have a 90 degree bend put into it. It folds back to meet the rocker panel. That's the last thing I'll do before welding.
